Network I/O

Enable Network I/O modules

Check this field to enable support for network I/O servers like the Moxa E2210/E1200.

Log device info

Use this field to specify what information should be logged in the port log.

Input Type

Use this field to specify the input type.

Message (low)

Use this field to specify the message that should be generated when a switch is changed to the low state.

Message (high/pushed)

Use this field to specify the message that should be generated when a push button is activated, or a switch is changed to the high state.

Minimum cycle time (secs.)

Use this field to specify the minimum cycle time for a 'switch channel'. The minimum cycle time, is the time that the channel must remain in a state before a message is generated.

Min time (High->Low)(sec)

Log message when device starts

Check this field if the current state of the push button should be logged when the network device comes on-line.

Port

Use this field to specify the port that this channel should generate a message for.

Minimum pulse count

Use this field to specify the minimum number of pulses. Every transition of the signal is counted as a pulse.

Time frame (ms) in which min. pulse cnt has to be reached

Use this field to specify the maximum pulse length.

Message (pulse)

Use this field to specify the message that should be generated when is pulsing.