NETLink PRO

Enable NETLink PRO Compact

Check this to enable support for the NETLink PRO Compact adapter.

Host/Addr:

Protocol Type

IP address of the NETLink PRO Compact adapter.

NET Link MPI device

Ping before connecting

Check this field to limit the TCP/IP connection load by pinging the device before attempting to open the COM port.

If the device does not respond to a ping message no attempt is made to open the port.

Cycle On

Use this field to specify the message generated when the cycle is on.

Cycle Off

Use this field to specify the message generated when the cycle is off.

Enable Feed Hold

Check this to enable feed hold.

Feed hold On

Use this field to specify the message generated when feed hold on.

Feed hold includes single step etc.

Feed hold Off

Use this field to specify the message generated when feed hold is off.

Feed hold includes single step etc.

M30 Counter #1

Use this field to specify the message generated when M30 Counter #1 changes

Enable control modes

Check this field to enable control modes.

Enabled

Address

Domain address.

Bytes

How many Bytes are read.

For example for reading of 1 byte beginning at address DBB 21.35 should be here 1.

For reading of 2 bytes from address DBB 21.35 should be here 2.

Data Type

Operation

Trigger Bit: trigger bit in read byte.

Trigger Mask: trigger more than one bit.

Text: read Bytes are converted to text.

Bit,Byte mask

Bit or Byte mask.

Text Length

Address where is stored actual text length. If this is empty, than is read length of text same like count of read bytes.

On

Off