Fillet intersections

• Click on the Fillet Elements icon in the Modify toolbar.

• Enter the value Fillet Radius = 2 in the CNC-Calc pane.

• Select the elements on which the fillet operation should be performed. This is done by left-clicking on the part of the elements that you want to keep.

  To fillet the leftmost corner, select the elements as indicated on the picture below by A and B. Then, you must select and left-click precisely on the arc element you want to keep. This is the pink arc on the picture below.

• Now repeat the operation to fillet the additional radius 2 corners.

  Select the other two corners A+B and A+C as shown at the picture below. Then select the correct arcs to keep. At the end of the operation the drawing should look something like the picture below.

Repeat fillet operation with radius 1 corners

• First change the Fillet Radius value in the CNC-Calc pane from 2.00 to 1.00.

You might want to zoom in on the area we will be working on, as on the picture below.

• Then select the 3 corners A+B, B+C and C+D as shown on the picture below. Then select the correct arcs to keep. At the end of the operation the drawing should look something like the following picture.

Now the drawing is finished, and it should look like the one below: